[FFA] Bandbreite optimieren
Steini
freifunk at total-connection.net
Mo Okt 24 16:36:43 CEST 2016
Hallo Marco,
also ich würd mal nen Backup von der /etc/config/luci_splash machen
(z.B. cp /etc/config/luci_splash /etc/config/luci_splash.bkp) und danach
in der /etc/config/luci_splash die vier Sections mit config iface
rauslöschen und den Router neustarten, evtl. geht da irgendwas beim
splashen schief oder sowas.
Eine Sache noch in der letzten Zeile is das Anführungszeichen falsch,
is das nen Copy&Paste-Fehler oder is das ' wirklich falsch ,?
Probier's mal und gibt Bescheid, ob's geklappt hat.
Gruß
Christian
Am 2016-10-23 11:59, schrieb Marco:
> Hallo,
>
>
>> 1.) Direkt auf der Shell die Bandbreite zu testen
>
> Verschiedene Tests via wget auf der shell haben nahezu 100 Mbit/s
> bestätigt.
>
>> 2.) Schau mal in cat /etc/config/luci_splash rein, ob Du da eine
>> oder
>> mehrere Sections hast die mit "config iface" beginnen. Dann ist
>> höchstwahrscheinlich der Splashscreen die Bremse.
>
> Anbei die /etc/config/luci_splash
>
> config core 'general'
> option leasetime '8'
> option limit_up '0'
> option limit_down '0'
>
> config iface 'wireless0dhcp'
> option network 'wireless0dhcp'
> option zone 'freifunk'
>
> config iface 'wireless0ahdhcp'
> option network 'wireless0ahdhcp'
> option zone 'freifunk'
>
> config iface 'wireless1dhcp'
> option network 'wireless1dhcp'
> option zone 'freifunk'
>
> config iface 'wireless1ahdhcp'
> option network 'wireless1ahdhcp'
> option zone ‚freifunk'
>
>
>
> Heute hab ich wieder circa 5 Mbit/s up und down bei einem Client über
> die Freifunk SSID.
>
>
> Grüße,
> Marco
>
> _______________________________________________
> freifunk-augsburg mailing list
> freifunk-augsburg at lists.subsignal.org
> https://lists.subsignal.org/mailman/listinfo/freifunk-augsburg
Mehr Informationen über die Mailingliste freifunk-augsburg