[luci] 回复：Re: how to control the property of buttons in a map?

[Le Tran Dat]

you can check the /etc/config/ucitrack to know which application will
be executed.

for example:
config network
        option init network #init file will be restarted /ect/init.d/network
        list affects dhcp #other applications: /etc/init.d/dhcp
        list affects radvd #other applications: /etc/init.d/radvd

so you can open the script and find file file called the wifi up

but I guess the /etc/init.d/network will call the wifi up.

in some cases, an application might put network into its affects list.
Then whenever you press save&apply on that application, after
restarting itself, it will call network to be restarted.



On Thu, Mar 6, 2014 at 4:14 PM, 子文 <u8j9 at 163.com> wrote:
> b
> Hello
>       I found luci will call wifi up command after pressing save & apply
> button, So I want to find where the luci  call the wifi up
>
>
>
>
>
> At 2014-03-06 10:12:45,"Le Tran Dat" <trandatnh at gmail.com> wrote:
>>hi u8j9,
>>
>>> How can I find what the save button do after pressing it?
>>http://luci.subsignal.org/trac/wiki/Documentation/LuCI-0.10#Hooks
>>
>>On Thu, Mar 6, 2014 at 8:59 AM, u8j9 <u8j9 at 163.com> wrote:
>>> How can I find what the save button do after pressing it?
>>> Sent from Huawei Mobile
>>>
>>> Seamus Tuohy <s2e at opentechinstitute.org>编写：
>>>
>>>>Hello 刘岚,
>>>>
>>>>The buttons can be controlled through the "flow" property of a map. This
>>>>value is not set in the model, but in the controller entry for that page.
>>>>
>>>>The options are:
>>>>{ skip, autoapply, hidesavebtn, hideresetbtn, hideapplybtn }
>>>>
>>>>skip: If true ADD the skip button.
>>>>autoapply: if true (and hideapplybtn not true) HIDE submit button.
>>>>hideapplybtn: if true (and autoapply not true) HIDE submit button.
>>>>hidesavebtn: If true HIDE the save button
>>>>hideresetbtn: if true HIDE the reset button.
>>>>
>>>>
>>>>These options are set as bool values in a table. This table is passed as
>>>>the second value of the cbi call.
>>>>
>>>>entry({"admin", "my_page"}, cbi("admin/my_page", {skip=true,
>>>>autoapply=false}), translate("My Page"), 15)
>>>>
>>>>
>>>>Hope that lets you do what you need to do.
>>>>
>>>>s2e
>>>>
>>>>On 03/05/2014 07:04 AM, 刘岚 wrote:
>>>>> Dear all I want to change some property of buttons in a map(not a
>>>>> simpleform).For example, I want to show the button "save & apply" and
>>>>> hide the other two or only show one of them in a page.How can I do
>>>>> this?thanks!
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________ luci mailing list
>>>>> luci at lists.subsignal.org
>>>>> https://lists.subsignal.org/mailman/listinfo/luci
>>>>>
>>>>_______________________________________________
>>>>luci mailing list
>>>>luci at lists.subsignal.org
>>>>https://lists.subsignal.org/mailman/listinfo/luci
>>> _______________________________________________
>>> luci mailing list
>>> luci at lists.subsignal.org
>>> https://lists.subsignal.org/mailman/listinfo/luci
>>_______________________________________________
>>luci mailing list
>>luci at lists.subsignal.org
>>https://lists.subsignal.org/mailman/listinfo/luci
>
>
>
>
> _______________________________________________
> luci mailing list
> luci at lists.subsignal.org
> https://lists.subsignal.org/mailman/listinfo/luci
>