[luci] r10253: Band/HTmode
Erich N. Pekarek
erich at pekarek.at
Sat May 31 17:01:05 CEST 2014
Hi!
I recently installed:
LuCI Trunk (svn-r10253) OpenWrt Barrier Breaker r40887
on a UBNT Nanostation Loco M5 and noticed changes as follows:
I guess that happed in reaction to my patches in
luci.subsignal.org/trac/ticket/678.
The implementation seems wrong to me:
a) In Band the selection for "Auto" and "802.11a only" are gone.
b) The translation for "HT mode disabled" is vexing.
c) "Band" is vexing.
Explanation:
Up to my knowledge 802.11n is "set on top of 802.11a/g".
HT Mode off/ht20/ht40/... does NOT have to do with rate and band
selection as such, it only has to do with CTS-to-self for compatibility
issues with non-802.11n devices (i.e. Legacy a/b/g).
Therefore:
c) should be "Mode" instead of "Band" just as usual:
802.11/802.11b/802.11g/802.11n+g/802.11n+a was correct in the first place.
b) "HT mode (802.11n)" should only be "HT mode" or "High througput",
since it exists only in n and ac. The value "disabled" is not
self-explanatory. Use "Compatibility mode" oder "Legacy Mode" (the later
is still not quite correct) instead.
a) Return to the previous values. The values represent a set of rates
and do not have to do with Band as such.
Or did I miss a step in development?
(Ticket (see above) is still open).
regards
Erich
-------------- n?chster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <http://lists.subsignal.org/pipermail/luci/attachments/20140531/9c0f586c/attachment.html>
-------------- n?chster Teil --------------
Ein Dateianhang mit Bin?rdaten wurde abgetrennt...
Dateiname : fabbfgje.png
Dateityp : image/png
Dateigr??e : 6994 bytes
Beschreibung: nicht verf?gbar
URL : <http://lists.subsignal.org/pipermail/luci/attachments/20140531/9c0f586c/attachment.png>
More information about the luci
mailing list